Do You Have A Bosch 10H?
If you’re sniffing around to have a Bosch 10H fixed, serviced or replaced, Plumbdog have you covered. We are a proud pack of genuine maintenance plumbers. This means we would rather fix a good hot water heater than toss it out saving money and waste. So if your Bosch unit isn’t working as it should or you’re on the hunt for a new hot water system supplied and installed, give us a whistle!
1
Bath
10 Year Warranty
Value For Money
Bosch 10H (HydroPower)
Instant Gas Hot Water System
Star Rating:
- The Bosch 10H HydroPower model range uses water movement to create its own small voltage that ignites the water heater.
- The Bosch 10H HydroPower consumes no gas or electricity when not in operation. Making it a very efficient design.
- Hydropower ignition system
- No 240 volt power required
- Continuous flow technology (heats only when required)
- User controls allows adjustment of the temperature and water flow
- External installation
- Attractive alternative to storage water heater with no power required
How We Work: Hot Water Repairs And Replacements
Here at Plumbdog Plumbing, we have a process that our customers appreciate and applies to all our work.
As soon as we receive your call or message, we arrange an onsite visit from your local Plumbdog Plumber to assess the work that needs doing and provide you with a fully transparent estimate that covers everything so that there are no hidden charges when you engage our services! If you are happy with the forecast, we will ask you to sign it off and commence work immediately.
For a Bosch 10H repaired or replaced, book your time with the top dogs and we’ll get your tail wagging!
Specifications & Warranties
Specificaitons: | |
|---|---|
Minimum Flow Rate | 10 L/pm
|
Suitable For | 1 Bathroom |
Manufacturers Parts & Labour Warranty (Domestic) | 2 Years
|
Recommended Service Schedules | 2 Years |
Link to Manufacturers Product Page | https://www.bosch-homecomfort.com/ |
Cold Water Connection | 15 mm
|
Hot Water Connection | 15 mm
|
Height | 845 mm
|
Width | 405 mm
|
Depth | 265 mm
|
Weight (Empty) | 21 Kgs
|
Energy Efficiency Rating | 5.3*
|
Gas Consumption | 79 Mj/h
|
Powerpoint Required | No |
Gas Connection | NG 20 mm / LPG 15 mm
|
Manufacturers Heat Exchanger Warranty (Domestic) | 10 Years (Heater Exchanger Only)
|
Hot Water Connection | 10 L/pm
|
Bosch 10H Gas Hot Water
If you’re on the hunt for a reliable and efficient hot water system that won’t leave you barking mad, look no further than the Bosch 10H Hot Water System. Designed to deliver consistent hot water on demand, this system is perfect for keeping your household running smoothly, whether it’s for those early morning showers or late-night dishwashing sessions.
Top Dog in Gas Hot Water Efficiency
The Bosch 10H is a high-efficiency, gas continuous flow hot water system. With an impressive 5.5-star energy rating, it’s a real top dog when it comes to saving on energy bills while reducing your carbon pawprint. You’ll enjoy endless hot water without the worry of running out, even when you’ve got a full house.
Tail-Wagging Features
- Compact Design: Its sleek and compact design makes it easy to install, even in tight spaces. Whether you’re in a cosy suburban home or a spacious rural property, the Bosch 10H fits right in.
- Durable and Reliable: Built to withstand the Aussie climate, the Bosch 10H is a robust and reliable choice. It’s constructed with high-quality materials to ensure long-lasting performance.
- Environmentally Friendly: This system uses natural gas, making it an eco-friendly option that’s gentle on the environment and your wallet.
Why Choose Bosch for Hot Water?
Bosch has been a trusted name in household appliances for over 100 years, and the 10H Bosch Hot Water System is no exception. With its combination of advanced technology and practical features, it’s no wonder so many Australians have made the switch.
Don’t let your hot water system be the runt of the litter. Upgrade to the Bosch 10H and enjoy the benefits of instant, efficient, and reliable hot water. Your kennel deserves it!
Bosch 10H - Frequently Asked Questions
If your hot water is not so hot, or goes hot and cold, or simply gives luke warm water, chances are you may have an issue with the hot water unit or even the plumbing at your property. At Plumbdog, we are known as the Top Dogs when it comes to servicing and maintaining hot water systems.
We would much rather repair and maintain a hot water system. This saves creating unnecessary waste in landfills and keeps more money in our customers pockets. When necessary, if we do recommend a new hot water system, we can also recommend whether a like for like replacement is sufficient or our Pedigree Plumbdog is more than happy to work out with you which system is best to replace with or if an upgrade is required.
Just like a car, your hot water system needs regular servicing – not just for optimum performance, but also to minimise the likelihood of a breakdown, which we all know can happen at the worst times.
One of the most common causes of water heater failure is blocked pilot tubes, where spider webs can obstruct the flow of gas.
Thermocouples, which ensure the gas valve remains closed when the system is not in use, have limited service life and must be periodically replaced. Other common problems are blocked line strainers, faulty ignition packs and faulty solenoids.
Regardless of the age or type of system installed, we recommend having it serviced at least once every two years by one of our fully qualified Plumbdog hot water plumbers. To ensure maximum life of your unit, you should also replace its sacrificial anode as part of regular servicing.
We have made the decision that we will not give a ‘free quote’ over the phone. With years of experience servicing our loyal Plumbdog clients, we know that no two properties are the same and we really need to visit your property to inspect in order to give an accurate estimate along with options and long term solutions rather than to simply give a dirt cheap price over the phone. Doing this leads to unhappy customers when prices increase because there is more to the job than the eyes can see.
Did you know that a simple ‘like for like replacement’ is often not just a like for like job? If you have searched around, you would see other plumbing companies showing the new piping jobs required because of ‘cheap and nasty workmanship’ previously completed. Hot water systems which are not installed to current code also means that hot water systems may need to be relocated or even the electrical work with regulations updated for your safety.
How we work is, we will send our trusted Plumdog to your property to inspect and have a chat to understand your needs and hot water issues. Inspecting and understanding more about your property and plumbing setup will minimise any unexpected expenses which often the other mongrels lack to mention until half way through the job when they hit you up with an unexpected problem costing you more.
The way we work at Plumbdog is a little different to others. We don’t bury call out fees, service fees or booking fees in our pricing estimates. We simply charge you the price of the job.
When you call us to book your technician, your customer service representative will schedule you an appointment with one of our technicians in a 4 hour time window at a mutually agreed upon time.
Our plumber will message you or call you when he’s on his way to your property so you’re not peering out the window like a lost puppy.
When he arrives on site he will have a chat with you about your plumbing issues and then return to his van to put an estimate together for the work you require.
He will present the estimate to you and if you are happy to proceed, your plumber will have you sign the estimate and he can usually get started on your job straight away.
We are top dogs when it comes to hot water systems, servicing and maintaining but there are occasions where we will need to consider installing new hot water systems and with new systems also comes some terms and conditions. Please see terms and conditions here